Work in this area generally covers:
* For examples of this equipment see
conformed with applicable:
Reconstruction of such accidents determines whether the facilities or equipment caused or contributed to the accident. Work in this area also generally includes determining whether revision of the facilities, operation, equipment or procedures was required for safety.
- accepted engineering practices
- codes, standards and regulations
specifically for the safety of:
- industrial and commercial facilities and operations
- agricultural, forestry and extraction (mining and drilling) facilities and operations
- construction facilities and activities
- evaluating safety design and safety procedures for industrial facility operations, including manufacturing facility operations, against accepted safety standards
MAAFE
- determining applicability and compliance with OSHA Regulations for industrial and construction activities, facilities and sites
MAAFE
- determining applicability and compliance with state regulations for industrial and construction activities, facilities and sites, such as the Industrial Commission of Ohio Specific Safety Requirements
MAAFE
- determining applicability and compliance with industry, technical organization and (other) governmental codes, standards and recommended practices for industrial, commercial, agricultural, forestry, extraction and construction activities and facilities and sites
MAAFE
- determining application of generally accepted standards for the safety of equipment and facilities
- determining whether equipment was properly installed
MAAFE
- determining whether safety equipment (including safeguards such as barrier guards, light curtains, dual operating buttons, etc.) and safety instrumentation had been in place and were properly used
MAAFE
- determining whether safety procedures had been in place and were properly used
- determining whether ventilation was properly used, where this is a safety issue
- determining whether drainage and sewer connections were effective and safe, where this is a safety issue.
- accidents involving industrial, commercial, agricultural, forestry, extraction and construction equipment*
- exposures to chemical vapors
- operations resulting in asphyxiation
- liquid spills causing burns
- runaway chemical reactions not fully protected by overpressure protection devices
- incorrect discharge of fire protection sprinkler system
- falls from scaffolding and ladders
- falls through walking surface openings
- falls through failed walking surfaces
- falls into flumes (persons and persons on equipment)
- tank explosions, including during cutting
- rupture of natural gas pipeline with fire and explosion
- restaurant, and commercial laundry operations, resulting in fire and/or explosion
- indoor and outdoor construction sites
- farms, forestry facilities, and drilling sites
- steel mills and steel processing facilities
- rubber and plastics processing facilities
- facilities manufacturing plastic, rubber, wood and metal products, for consumer, commercial, and industrial use
- chemical manufacturing facilities
- outdoor storage facilities
- similar industrial and commercial facilities.
- persons employed by the owner or operator of the facility, or construction contractor/sub-contractor
- persons not employed by the owner or operator of the facility, or construction contractor/sub-contractor
Madden
Accident
Analysis &
Forensic
Engineering
took extensive college coursework in engineering design of industrial facilities and equipment and the operation of industrial equipment and facilities
Examples of persons involved in analyzed accidents
● see examples of analyzed accidents and involved facilities in previous 2 sections above
Examples of Accidents Analyzed
● see examples of facilities in which analyzed accidents occurred, in next section below
Examples of facilities in which analyzed accidents occurred
● see examples of persons involved in analyzed accidents in next section below
Examples of Analyses to Address Issues for Industrial and Commercial Operations, Construction
Activities, Commercial and Industrial Facility Design and Workplace Accidents
Our Engineering Analysis of Workplace Accidents, including Industrial and Commercial Operations, Construction Activities, Commercial and Industrial Facility Design, Agricultural, Forestry and Extraction Accidents
Our Engineering Analyses of Workplace Accidents, Industrial and Commercial Operations, Construction Activities, Commercial and Industrial Facility Design and Extraction, Forestry and Agricultural Accidents include, as appropriate, investigation, engineering analysis and reconstruction of the accident, as required to address the issues. Our analysis includes determination of adherence to the Occupational and Health Administration (OSHA) Code and any state and local regulations for industrial and commercial operations and facilities, and construction activities.
click on underlined words to use links - if no word is underlined try hovering the mouse over words to see underlines
Experience and Qualifications of James D. Madden, P.E. in regard to Workplace Accidents, including Industrial and Commercial Operations, Construction Activities, Commercial and Industrial Facility Design, Agricultural, Forestry and Extraction Accidents
● attended engineering seminars presented by the National Academy of Forensic Engineers
regularly attend additional technical courses and seminars each year to meet the requirements for continuing engineering education for the Professional Engineer's license
● over 40 years of engineering experience, with:
● 17 years experience in industrial operations, engineering design and construction assistance
● 30 years experience in forensic engineering, including:
● working on over 1000 cases
● issuing over 600 reports and over 60 affidavits
● testifying in over 90 depositions and over 75 trials
over 155 incidents involving agricultural, extraction, forestry, industrial and commercial operations, construction activities, and commercial and industrial facility design have been investigated, analyzed and reconstructed as part of the forensic engineering work over the last 30 years
earned 2 Engineering degrees, Bachelor of Science and Master of Engineering, and took additional post-degree coursework, with coursework in physics, chemistry, mathematics, engineering mechanics, mechanical engineering, chemical engineering and normal psychology
at the start of forensic work, completed refresher and additional post-degree college credit coursework and continuing education coursework in mechanical engineering, metallurgy and materials
earned the Professional Engineers license (P.E.) by taking the National Council of Engineering Examiners' (NCEE) examination in Fundamentals of Engineering and the Mechanical Engineering and Chemical Engineering sections of the NCEE examination in Principles and Practices of Engineering
designated a Diplomate Forensic Engineer by the National Academy of Forensic Engineers in accordance with the standards of the Council of Engineering and Scientific Specialty Boards (CESB)
<< click for a description of the typical activities and work performed
<< click for examples of Accidents analyzed
<< click for examples of Facilities involved in accidents
<< click for examples of Persons involved in accidents
<< click for a description of the typical activities and work performed
<< click for examples of Accidents analyzed
<< click for examples of Facilities involved in accidents
<< click for examples of Persons involved in accidents
<< click for additional information on the analyses to address issues
<< click for additional information on the engineering analyses
Our Work with Workplace Accidents: Industrial, Commercial, Farm, Forest, Extraction and Construction, with Sites, Facilities, Operations and Activities - includes investigation and engineering analysis of facility operations, design and conditions, and site conditions and activities, and reconstruction of accidents associated with these operations and activities.
Our work includes assessment of the effectiveness of the use of safeguards and warnings, and the adherence to applicable codes, standards and recommended practices, including the OSHA Code, for both the equipment and facilities and the operations and activities. Our work includes assessment of the activities of the persons involved in the accident, as these activities relate to the accident.
In regard to the facilities analyzed, our work in this area covers issues which are more specific to the special characteristics of industrial, commercial, farm, forest, extraction and construction facilities and sites, rather than the general features and characteristics of a broad range of buildings and properties which are covered on the Premises Accidents page.
Table of Contents - Workplace Accidents: Industrial, Commercial, Extraction, Farm & Forest and Construction and related Subjects - links to content on this page
^^^ click on buttons to go to other pages covering these subjects ^^^
Madden Accident Analysis & Forensic Engineering, through its Senior Forensic Engineer, James D. Madden, P.E., a licensed professional engineer, has performed Accident Investigations, Engineering Analyses and Accident Reconstructions for accidents, incidents and cases in the metropolitan areas of Cleveland, Akron, Canton, Toledo, Warren, Youngstown, Mansfield, Columbus, Dayton, Cincinnati, Lima, Findlay, Marietta and Steubenville, as well elsewhere throughout Ohio, and the metropolitan areas of Pittsburgh and Erie, as well as elsewhere throughout western and central Pennsylvania, and the metropolitan areas of Detroit, Ann Arbor, Lansing, Flint and Port Huron, as well as elsewhere in southern Michigan, and the metropolitan areas of Buffalo and Syracuse, as well as elsewhere in western and central New York state. In many of these areas James D. Madden, P.E. has provided expert reports and testified in the capacity of an Expert Witness in court proceedings, including depositions, arbitrations and/or trials.
Madden Accident Analysis & Forensic Engineering, through its Senior Forensic Engineer James D. Madden, P.E., is available for Accident Investigations, Engineering Analyses, Accident Reconstructions, and testimony in deposition, arbitration and trial, for cases located throughout North America.
Consultation is available before starting a case. We invite you to
consult with us. There is no charge for an initial phone consultation.
Call us, or if you prefer we can schedule the consultation in advance.
Consultation with James D. Madden, PE, a Professional Engineer, and Forensic
Engineering Consulting and Testifying Expert Witness, is available to the client at all
times during the work - before, during, and after the investigation,
engineering analysis, reconstruction, report, and any other work on the case.
Download a Summary or Detailed Curriculum Vitae (CV) / Resume' for James D. Madden, P.E.,
email us, and bookmark this website.
Qualifications of James D. Madden, P.E., Senior Forensic Engineer
Downloads and Links - Curriculum Vitae, Email and Bookmark
For mailing address, phone, fax and email address click a button below the Fee Schedule section.
Contact us by phone, fax, mail or email for a copy of the Fee Schedule for charges for engineering
and consulting services and testimony. Click a button below for contact information.
Over the last 30 years we have regularly worked on accidents which occurred in Ohio, Pennsylvania, Michigan, New York and nearby, including inspections of accident sites, equipment, and facilities, with reports and testimony. During these 30 years we have also worked on accidents which occurred in other states, and equipment and facilities located in other states, with inspections of accident sites, equipment, and facilities, from Utah and Kansas to Vermont and North Carolina, with reports and testimony for these accidents, when applicable.
Geographic Area of Practice - North America
Contact us to discuss your case by phone at NO CHARGE.
This consultation can be scheduled in advance to meet your schedule.
● verbal reports, by telephone or in face-to-face conferences
We present the results of our investigations, engineering analyses and reconstructions in
the client's choice of any, or all, of the following:
Presentation of results of our work
Our work investigating, analyzing and reconstructing accidents, and presenting the results, may include any
or all of the following, depending on the needs of the case:
Our Typical Work Activities and Products, when warranted by the case
● written reports and affidavits
● deposition testimony, including video deposition
● trial testimony and arbitration testimony
James D. Madden, P.E., while performing Forensic Engineering work full-time for over
the last 30 years, for both plaintiff and defendant, has to date:
Forensic Engineering Work by Senior Forensic Engineer James D. Madden, P.E.
● completed over 1000 cases
● written and issued over 600 reports
● testified in over 90 depositions
● written and issued over 60 affidavits
● testified in over 75 trials
See details of the forensic work throughout this website, and a summary on the Employment Page.
The qualifications of James D. Madden, P.E., Senior Forensic Engineer, Consulting and Testifying
Use the Search Box at the left to search the whole website.
Use Control F, 'Ctrl' + 'F', to locate specific words on this page.
Bookmark this site by typing Control D ('Ctr' + 'D').
■ Also see Premises Accidents for accidents in workplaces involving premises features, on another page.
click on the underlined squares and underlined words to link to the subjects
■ Our Forensic Engineering Work - number of ● Cases ● Reports ● Affidavits ● Testimonies
■ Experience & Qualifications in regard to Industrial, Commercial and Construction Accident
■ Curriculum Vitae, CV, Resume'
■ Contact Us by Phone, Mail or Email
■ Consult, before and after assignment
■ Fee Schedule Availability
■ Examples of Issues Analyzed
■ Examples of Workplace Accidents Analyzed
■ Examples of Facilities involved in Accidents
■ Examples of Persons involved in Accidents
■ Our Typical Work Activities and Products
■ Presentation of The Results of Our Work
■ Other Experience & Qualifications
■ Geographic Area available for Work
■ Links to Other Pages (left sidebars)
■ Our Engineering Analysis of Operations, Activities and Facilities associated with Workplace Accidents
● inspection of the accident site, such as a roadway, outdoor facilities, building or industrial facilities
inspection of the involved equipment, in current condition, including in damaged condition (such as crashed vehicles); and when available for operation, during operation (such as industrial equipment)
● interviewing witnesses (often during the inspection of the accident site, product and/or equipment)
coordinating or interfacing with others while they are preparing specialized exhibits such as video animations and videos of demonstrations
review and study of case documents, evidence and applicable codes, standards, regulations and recommended practices
● written reports and affidavits, and exhibits
drawings, calculations, graphical analyses, computer analyses, etc. as required to analyze and reconstruct the accident, and to present the engineering analysis and reconstruction
● testing accident items and exemplar items (such as consumer products)
● photography and/or video of the accident site and involved equipment
● testimony in deposition, trial and arbitration
for more information,
click on subject listings below
These Specialties are in a website which will open in a separate tab to the right of the current tab. This website in the current tab and the new website will be available side by side.
Safeguards and Warnings are particularly relevant to Specialties listed below
Consumer and Workplace Safeguards & Warnings
brown buttons below open pdfs in separate tabs for downloading
or printing
If lines of text overlap in this website check the browser zoom setting - reducing the zoom should prevent overlap of lines of text.
If parts of the website are missing or distorted, such as a section of the Left Navigation Bar, or a button, try rebooting the page in the browser, one or more times - click on the circle arrow at the left of the website name [URL].
Madden Accident Analysis & Forensic Engineering
over 30 Years Investigating, Analyzing, Reconstructing & Testifying about Accidents
Forensic Engineering & Scientific Accident Reconstruction
Copyright 2011, 2012, 2015, 2016, 2018, 2019 by Madden Accident Analysis & Forensic Engineering and James D. Madden, P.E., aka James Madden and Jim Madden.
All rights reserved. This website contains photographs which are licensed with restrictions that prohibit downloading, reproduction, re-publication or re-transmission.
Madden Accident Analysis & Forensic Engineering, through its Senior Forensic Engineer, James D. Madden, P.E., a licensed professional engineer, has performed Accident Investigations, Engineering Analyses and Accident Reconstructions routinely for accidents, incidents and cases located in Ohio, Pennsylvania, Michigan, and New York, in the technical areas which are noted in this website, as well as providing expert reports and testifying in court proceedings in these states in the capacity of an Expert Witness, including depositions, arbitrations and/or trials, with Forensic Engineering work also performed in, and/or for cases in, Illinois, Maryland, North Carolina, Vermont, Kansas and Utah, with testimony in court in Kansas.
Madden Accident Analysis & Forensic Engineering
1700 West Market Street, Suite 318, Akron, Ohio 44313, or
8803 Brecksville Road, Suite 7-216, Cleveland, Ohio 44141
phone: 440-838-1191 or 440-832-9540, fax: 440-838-1192
